EA16A Voltage Regulator:
-
Voltage Regulation < ±0.5%
-
Suitable for brushless type generator Sensing Input 170~510 VAC
-
Can be used in Parallel Operation
-
16 ADC Current Output
-
EA16 Suitable Frequency 50/60 Hz
Soft Start Voltage Ramping
-
Load CT Current Compensation, Analogue Voltage Input
|
Sensing Input |
Voltage 170~510 VAC single phase 2 wire |
|
Frequency 50/60 Hz |
|
Power Input |
Voltage 60~300 VAC single phase 2 wire |
|
Output |
Voltage Max. 90 VDC @ 240 VAC input
Current Continuous 16A, Max. Intermittent 20A for 10 sec.
Resistance Min. 6 Ohm @ 35 VDC |
|
Voltage Regulation |
< ±0.5% (with 4% engine governing) |
|
Voltage Build-up |
Residual volts at AVR terminal > 5 VAC |
|
External Volts Adjustment |
±5% with 2 K Ohm 1 watt trimmer |
|
Unit Power Dissipation |
Max. 10 watt |
|
Thermal Drift |
0.03% per °C change in AVR ambient |
|
Under Frequency Protection |
55 Hz @ 60 Hz / 45 Hz @ 55 Hz (Adjustable) |
|
CT Current Compensation Input |
1A or 5A (Selectable) |
|
Analogue Input |
±5 VDC ±10% AC @ ±3 VDC |
|
Environment |
Operating Temperature : -40~70 °C
Storage Temperature : -40~85 °C
Relative Humidity : Maximum 95%
Vibration : 3.3G @ 100~2 KHz |
|
AVR Controls Functions |
VOLT : Voltage Adjustment
STAB : Stability Adjustment
U/F*: To Set the U/F Knee Point
DROOP : To Adjust Droop
TRIM : Analogue Input Adjustment
(*U/F: Under Frequency Protection) |
|
Dimensions |
156.0 (L) x 106.0 (W) x 43.0 (H) mm |
|
Weight |
450g ±2% |
The following are our products:
1. CF Brushless AVR: CF-8A, CF-12A, CF-15A,SAVRH-75A, SAVRH-PCB, SAVRL-75A, SAVRL-PCB.
2. Stamford AVR: AS440, MX321, MX321-A, MX341,MX341-A, SX440, SX440-A, SX440-T, SX460, SX460-A.
3. Leroysomer AVR: R230, R438, R448, R449, SSAYEC432.
4. Marathon AVR: SE350.
5. Brush AVR: DX-2E, DX-5E, DX-7E, DX-8E, DX-11E, DX-05A.
6. Cummins Engine Governor: 3036453, 34008326, EFC3044196, ESD5111, ESD5500E.
7. Controller: CTR101, CTR168, DSE501K, DSE5110
8. Kutai AVR: EA04C, EA05A, EA06, EA230, EA16A.
