Deep sea controller DSE701
*The model 701/702 is an Engine control module designed to control the engine via a key switch and
pushbuttons on the front panel.
*The module is used to start and stop the engine and indicate fault conditions,automatically shutting down the
engine and indicating the cause of failure by LED,giving true,first up fault annunciation.
*Additionally,the Autostart versions of the controller will respond to a remote switched input to begin the start
sequence.
*Model 702 has integral tamperproof LCD hours run counter to indicate total engine run time.
| Power Supply | 8 to 35 Vdc Continuous |
| Cranking Dropouts: | Able to survive voltage dips during cranking. Without
the need for internal batteries. |
| Alternator Input Range | 15 - 305 V AC RMS (+20%) |
| Alternator Input Frequency: | 50 - 60 Hz at rated engine speed. (Minimum 75V AC)
Overspeed: nominal frequency +14% (+24% Overshoot) |
| Start Output: | Solid State 1.2A negative grounding terminal |
| Run Output: | Solid State 1.2A negative grounding terminal |
| Pre-heat Output: | Solid State1.2A negative grounding terminal |
| Operating Temperature Range: | -30 to +70°C |
| Relative Item NO. | DSE501K | DSE701AS | DSE701MS | DSE702AS | DSE702 MS | DSE704 |
| Relative Item NO. | DSE5210 | DSE5120 | DSE5110 | DSE720 | DSE710 |
